Thx man i looked very good and my final check that there is no trailer fuse. I have sticker in korean, checked slot that translates as trailer, but there is no metal pin in it...
2023 Palisade tow hitch harness
Hello friends.
I just traded in my 22 Palisade for a 23 Palisade.
I ended up buying a new tow hitch and tow hitch harness for my new vehicle just like I did for my 2022.
Bought the same tow hitch I had on my old one and it works perfect.
The only problem is that I can’t find where to connect my tow hitch harness.
Anyone with the same issue?
On the 22 model there was a plug behind the driver’s side rear bumper that was very easy to install.
On this one, the harness doesn’t split.
I just traded in my 22 Palisade for a 23 Palisade.
I ended up buying a new tow hitch and tow hitch harness for my new vehicle just like I did for my 2022.
Bought the same tow hitch I had on my old one and it works perfect.
The only problem is that I can’t find where to connect my tow hitch harness.
Anyone with the same issue?
On the 22 model there was a plug behind the driver’s side rear bumper that was very easy to install.
On this one, the harness doesn’t split.
161 - 180 of 182 Posts
Hello everyone,
Just got the trailer hitch wiring harness part# S8F67-AC800 for my 2023 Palisade. Got it May 19th but the ETA was for June 6th. Unfortunately, I had to cancel two camping trips because of this back order.
I installed the harness as it’s plug and play and simple to install. Please note that there are several plugs (6-7) and so I would not recommend having a trailer hitch shop install the harness by splicing into the wires as the dealer recommended me to do at the time. Hyundai (the dealer and Hyundai Canada) could not give me a straight answer as to whether that was covered under warranty. Reading previous blogs, there have been fires due to 3rd party meddling, hence my concern.
To answer Tkmitchell’s question about where I installed the brake module, well it is on the fuse hatch cover lid (beside your left knee when you are at the wheel). The hatch has a handle hole & that’s where I passed the wires (not my idea, got that from a previous blog…). It is esthetically OK and not at all in the way.
Thanks all for your advice on this.
Pierre-Yves
Just got the trailer hitch wiring harness part# S8F67-AC800 for my 2023 Palisade. Got it May 19th but the ETA was for June 6th. Unfortunately, I had to cancel two camping trips because of this back order.
I installed the harness as it’s plug and play and simple to install. Please note that there are several plugs (6-7) and so I would not recommend having a trailer hitch shop install the harness by splicing into the wires as the dealer recommended me to do at the time. Hyundai (the dealer and Hyundai Canada) could not give me a straight answer as to whether that was covered under warranty. Reading previous blogs, there have been fires due to 3rd party meddling, hence my concern.
To answer Tkmitchell’s question about where I installed the brake module, well it is on the fuse hatch cover lid (beside your left knee when you are at the wheel). The hatch has a handle hole & that’s where I passed the wires (not my idea, got that from a previous blog…). It is esthetically OK and not at all in the way.
Thanks all for your advice on this.
Pierre-Yves
Hi was this shipped to you or picked up? You must have had an early order number.Was this from Hyundai parts of Toronto,a lot of people are still waiting for this part and have postponed vacation trips too.
Do you recall when you originally ordered it??...I ordered mine on January 19th. I got the noticed that mine is on its way and just wondering how long it took yours to get to youHello everyone,
Just got the trailer hitch wiring harness part# S8F67-AC800 for my 2023 Palisade. Got it May 19th but the ETA was for June 6th. Unfortunately, I had to cancel two camping trips because of this back order.
I installed the harness as it’s plug and play and simple to install. Please note that there are several plugs (6-7) and so I would not recommend having a trailer hitch shop install the harness by splicing into the wires as the dealer recommended me to do at the time. Hyundai (the dealer and Hyundai Canada) could not give me a straight answer as to whether that was covered under warranty. Reading previous blogs, there have been fires due to 3rd party meddling, hence my concern.
To answer Tkmitchell’s question about where I installed the brake module, well it is on the fuse hatch cover lid (beside your left knee when you are at the wheel). The hatch has a handle hole & that’s where I passed the wires (not my idea, got that from a previous blog…). It is esthetically OK and not at all in the way.
Thanks all for your advice on this.
Pierre-Yves
Hello LeRoy S. The order was placed February 13th 2023. Sounds like there are discrepancies in delivery time due to your location. Hope that is sorted out soon for you. Pierre-Yves
Hello LeRoy S.
The order was placed February 13th 2023 at Pathway Hyundai <[email protected]>. They are in Orleans, a suburb of Ottawa.
Sounds like there are discrepancies in delivery time due to your location.
Hope that is sorted out soon for you.
Pierre-Yves
The order was placed February 13th 2023 at Pathway Hyundai <[email protected]>. They are in Orleans, a suburb of Ottawa.
Sounds like there are discrepancies in delivery time due to your location.
Hope that is sorted out soon for you.
Pierre-Yves
I don't remember exactly but seems like mine took a week in customs.Do you recall when you originally ordered it??...I ordered mine on January 19th. I got the noticed that mine is on its way and just wondering how long it took yours to get to you
Got an update today on my part and its on its way to my distribution center and delivery estimated by May 24th.I don't remember exactly but seems like mine took a week in customs.
Hello all!-I traded my 22 calligraphy for a 23 due to a nice old tree🤪. I’m trying to find a solution as well here in the US. When I ask my dealership here about the wiring harness and such that seems to be in Canada they tell me that it is a separate market any they have no timeline for me. Does anyone have this issue as well? Is there a workaround that will also not void the warranty? This is, IMHO, false advertising.
thank you for any information you may have.
thank you for any information you may have.
To the ones installed the Canadian harness (or any other for that matter) where/how you mount the 7-pin connector?
I saw some brackets with two screws, and thinking if drilling two small holes in the hitch (on the flat piece from the tube to receiver) is a good idea?
I saw some brackets with two screws, and thinking if drilling two small holes in the hitch (on the flat piece from the tube to receiver) is a good idea?
To the ones installed the Canadian harness (or any other for that matter) where/how you mount the 7-pin connector?
I saw some brackets with two screws, and thinking if drilling two small holes in the hitch (on the flat piece from the tube to receiver) is a good idea?
I received my harness today....I have pictures attached to show what all came with it.I don't remember exactly but seems like mine took a week in customs.
I am going to attempt to install the harness this weekend, like you said in earlier posting, the instruction seems pretty straight forward with pictures!!!...LOL
I found an attachment from CURT that attaches to the receiver with a space next to it for the harness. It was about $20 or so...I believe I got it from etrailer.comTo the ones installed the Canadian harness (or any other for that matter) where/how you mount the 7-pin connector?
I saw some brackets with two screws, and thinking if drilling two small holes in the hitch (on the flat piece from the tube to receiver) is a good idea?
Hi am I seeing right that these were made in China in August of 2022 ?Here are pictures of the harness I got today from Canada
i make a little bracket for it that i attached to the receiver.To the ones installed the Canadian harness (or any other for that matter) where/how you mount the 7-pin connector?
I saw some brackets with two screws, and thinking if drilling two small holes in the hitch (on the flat piece from the tube to receiver) is a good idea?
Probably. Been available in Canada for months. I got mine in December and that was after others mentioned getting one. You know, since the US is having all this bullshit trade war with China, wonder if it being made there is causing some issue with it being released here?Hi am I seeing right that these were made in China in August of 2022 ?
They (Hyundai) should be giving a discount to us if that is true, but we will never know.i make a little bracket for it that i attached to the receiver.
Probably. Been available in Canada for months. I got mine in December and that was after others mentioned getting one. You know, since the US is having all this bullshit trade war with China, wonder if it being made there is causing some issue with it being released here?
Here is the site that is from CURT for a bracket that I ordered from etrailer.
www.curtmfg.com
Also, I have a pic attached of it...
Easy-Mount Trailer Wiring Mounting Brackets
A vehicle-to-trailer wiring connector can be a nuisance when you're not towing. Just lying around the trunk area, it can get tangled up or damaged by cargo. CURT Easy-Mount™ electrical brackets are the ideal solution for keeping your vehicle-to-trailer wiring protected, out-of-sight and ready...
www.curtmfg.com
Also, I have a pic attached of it...
Attachments
-
113 KB Views: 1
Its pretty solid...Here is the site that is from CURT for a bracket that I ordered from etrailer.
Easy-Mount Trailer Wiring Mounting Brackets
A vehicle-to-trailer wiring connector can be a nuisance when you're not towing. Just lying around the trunk area, it can get tangled up or damaged by cargo. CURT Easy-Mount™ electrical brackets are the ideal solution for keeping your vehicle-to-trailer wiring protected, out-of-sight and ready...
Also, I have a pic attached of it...
Go to etrailer.com. they sell a bracket for cheap money comes with a dust cover. Just ask the chat agent if you can't find it in their store.i make a little bracket for it that i attached to the receiver.
Probably. Been available in Canada for months. I got mine in December and that was after others mentioned getting one. You know, since the US is having all this bullshit trade war with China, wonder if it being made there is causing some issue with it being released here?
Have you installed it already? I wonder why the manual says the harness should be installed before hitch. Does installed hitch prevent installation of harness? I’m still waiting for my harness, but ready to install hitchHere are pictures of the harness I got today from Canada
161 - 180 of 182 Posts
Hyundai Palisade Forum
We invite you to join our community to explore Hyundai release prices, reviews, specs, interior, cargo space and much more!
Full Forum Listing
Recommended Communities
