Hyundai Palisade Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
Does anyone know if you can swap the stock sensors to aftermarket rims or do I have to buy new sensors?
 

·
Registered
Joined
·
84 Posts
Discussion Starter #5
Well I hope so.....they are the exact part number that Hyundai uses. The description doesn’t say they fit the Palisade but if they don’t Amazon has an easy return process.
 

·
Registered
Joined
·
84 Posts
Discussion Starter #6
You can swap sensors but will need to buy new tpms valves. They are usually around $2-3 each.


Sensor and valve are held together by a small screw.


Look up on www.rockauto.com
So Rockauto list two different stems for the Palisade. The only difference is one says it has a 90 degree key. Do you know which one I need? They are only $1.08 and $1.40 each I’m going to buy them just in case the sensors I bought don’t work.
 

·
Registered
Joined
·
14 Posts
So Rockauto list two different stems for the Palisade. The only difference is one says it has a 90 degree key. Do you know which one I need? They are only $1.08 and $1.40 each I’m going to buy them just in case the sensors I bought don’t work.
Can you send me link of sensors you bought?
 

·
Registered
Joined
·
14 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #10
Well I bought new Schrader valve stems last night and I’m just going to swap the OEM sensors and send those new sensors back.
 
1 - 10 of 10 Posts
Top