Hi Everyone,
hoping someone can please help me. Our palisade is just shy of 60k miles and as part of routine maintenance just replaced the ignition coils and spark plugs.
All seemed fine and straight forward
then proceeded to use the CRC GDI injector cleaner
Turned off the car ready to test drive and the 3 codes came up P0201. P0203, P0205.
pointing to the back cylinders.
i used the ignition coils and spark plug kit from 1A Auto.
not sure what went wrong. Should i put back one of the OEM ingition coils back and retest?
any advice or guidance would be much appreciated
thx
hoping someone can please help me. Our palisade is just shy of 60k miles and as part of routine maintenance just replaced the ignition coils and spark plugs.
All seemed fine and straight forward
then proceeded to use the CRC GDI injector cleaner
Turned off the car ready to test drive and the 3 codes came up P0201. P0203, P0205.
pointing to the back cylinders.
i used the ignition coils and spark plug kit from 1A Auto.
not sure what went wrong. Should i put back one of the OEM ingition coils back and retest?
any advice or guidance would be much appreciated
thx
Maybe the codes mean you did this too early, my manual says:
