[srobak]

Coil sticks can be finicky. Are you sure they are pressed down completely? Push hard. If that doesn't work - I would put one coil back and see if that cylinder's code clears. I have a feeling you may have either the wrong coils, or some bad ones.

 

[srobak]

Great news.... very glad to hear it.

The contacts inside the stick have to press over the tip of plug and secure into the groove. Sometimes the sticks need a solid smack with the palm of the hand to get past it. When you change them out you may also need to exert some force to pull the sticks off the plugs as well.