Hyundai Palisade Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have been studying the Palisade manuals and found this in section 3.15-3.16.

Being the first model year for this vehicle and concerned that I might get caught out somewhere in the middle of no where without cellular access, I thought this might be a beneficial tool to at least get me home or to a location where I can call for help!

I have contacted my local dealership two months ago and they have contacted Hyundai but so far no response (even after follow up)!?

I am looking for the limp home password to be able to get my vehicle to a safe location.

Has anyone else followed up on this feature?

PS I love this vehicle and all the features - I am retired so I have made this a project to get to know everything about my new Palisade.
Thanks everyone for your experiences and stories on this forum.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Sterling, this was in the Canadian Palisade manual.

I did a quick search in the US manual but did not see it there!?

Here is the info from my manual ...

"Limp Home" Mode and Related Procedures If the immobilizer warning indicator blinks for five seconds when the ignition key is turned to the "ON" position, this indicates the immobilizer system requires service. The engine cannot be started without using the procedure below. The following procedure describes how to start the engine using the limp home function (0, 1, 2, 3 as a sample password).
You can get a limp home password when the vehicle is first delivered to you. If you do not have a password, consult your authorized HYUNDAI dealer. NOTICE
i
NOTICE
3
In order to prevent theft of your vehicle,do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential. WARNING
3-16
1. To activate the password, turn the ignition key "ON" and "OFF" according to the digit numbers. The immobilizer indicator will blink along with the operation of the ignition key. For example, turn the ignition key once for digit number "1", and twice for "2", and so on. For the digit number "0", you must cycle the ignition key 10 times. 2. Wait for 3~10 seconds. 3.You may set the remaining number of digits by following steps 1 and 2. 4. If all of the four password digits have been successfully entered, turn the ignition key "ON" and check that the immobilizer indicator illuminates.From this time, you have to start your engine within 30 seconds. If you try to start your engine after 30 seconds, your engine will not start.
If the engine stalls while driving in the "limp home" mode, you can start your engine within 3 seconds without re-entering the password.
If the immobilizer indicator blinks for five seconds, you must re-enter the password (steps 1~4).
After performing the limp home activation procedure, consult with your authorized HYUNDAI dealer as soon as possible.
 
1 - 4 of 4 Posts
Top