Hyundai Palisade Forum banner

1 - 20 of 41 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter #1
The first mod for my Palisade is swapping the old bulky light-less mirror for a new frameless with compass and HomeLink indicator.
Almost plug and play except for the wires on the new mirror need to re-arrange to match the factory harness. 10 minutes job.
672
673
674
675
 

·
Registered
Joined
·
150 Posts
I have to say that was one of the few things that I noticed that was deficient on the Palisade vs the rivals - the bulky mirror vs the frameless. That looks great, nice job!
 

·
Registered
Joined
·
71 Posts
Discussion Starter #6
Thanks! I also disable the Homelink feature that won't work when ignition off. So if someone smashing my windows they won't be able to open the garage doors. That's one of the flaw for most Homelink mirrors.

I have to say that was one of the few things that I noticed that was deficient on the Palisade vs the rivals - the bulky mirror vs the frameless. That looks great, nice job!
 

·
Registered
Joined
·
99 Posts
Thanks! I also disable the Homelink feature that won't work when ignition off. So if someone smashing my windows they won't be able to open the garage doors. That's one of the flaw for most Homelink mirrors.
Yes! that is the issue I have w the current homelink, it works without ignition on.
So the upgrade you can program the homelink to only work when car is on?

thanks
 

·
Registered
Joined
·
99 Posts
Thanks! I also disable the Homelink feature that won't work when ignition off. So if someone smashing my windows they won't be able to open the garage doors. That's one of the flaw for most Homelink mirrors.
how do you like the BlackVue dash cam?
 

·
Registered
Joined
·
71 Posts
Discussion Starter #9
On the factory harness, there are 4 wires coming to the socket: ground, constant, switched and reverse. On the mirror harness/plug, remove the constant wire and connect that wire to the switched wire will disable Homelink when the vehicle ignition off. You'll have to mod this with either OEM mirror or upgrade frameless mirror.

I've been using dashcam for the last 7 years, had Lukas, Finevue, Garmin and a few cheap ones but they've all failed both hardware and/or software. I also had 3 other Blackvue dashcams on my vehicle and found them well build and features rich. They are pricey but I wouldn't want anything less.

Yes! that is the issue I have w the current homelink, it works without ignition on.
So the upgrade you can program the homelink to only work when car is on?

thanks
 

·
Registered
Joined
·
99 Posts
On the factory harness, there are 4 wires coming to the socket: ground, constant, switched and reverse. On the mirror harness/plug, remove the constant wire and connect that wire to the switched wire will disable Homelink when the vehicle ignition off. You'll have to mod this with either OEM mirror or upgrade frameless mirror.

I've been using dashcam for the last 7 years, had Lukas, Finevue, Garmin and a few cheap ones but they've all failed both hardware and/or software. I also had 3 other Blackvue dashcams on my vehicle and found them well build and features rich. They are pricey but I wouldn't want anything less.
so i can disable homelink when car is off w the OEM mirror.
How do I know which wire is the ground, constant, switched, reverse?
SO I need to splice the constant wire to switched wire and then put back into harness?
 

·
Registered
Joined
·
6 Posts
Do you think they will make auto dimming side mirrors? First car so not sure how much more technically difficult it is than rear view mirror
 

·
Registered
Joined
·
71 Posts
Discussion Starter #14
The picture shows the factory harness with 4 wires: Red is constant.Green is switched.
I would suggest leave that harness intact. On the mirror harness/plug remove or cut off whatever wire connect to the red side and tap it to whatever wire connect to the green side then your HomeLink will not working if ignition off.


so i can disable homelink when car is off w the OEM mirror.
How do I know which wire is the ground, constant, switched, reverse?
SO I need to splice the constant wire to switched wire and then put back into harness?
 

Attachments

·
Registered
Joined
·
59 Posts
That's all fine, but what I'm trying to find out is how to actually get to the harness/plug. What I want to do is tap into the power wire to run a radar detector. On my Limited, there is a plastic cover that prevents seeing the harness.
 

·
Registered
Joined
·
71 Posts
Discussion Starter #16
Using a plastic panel remover or flat head screwdriver and gently pry off the middle section of the cover behind the mirror then you'll have access to mirror harness. You can start at the gap between the headliner and the plastic cover. It'll come out easy.

onexcite, can you tell me how you accessed the power plug to the back of the factory mirror?
 

·
Registered
Joined
·
1 Posts
The first mod for my Palisade is swapping the old bulky light-less mirror for a new frameless with compass and HomeLink indicator.
Almost plug and play except for the wires on the new mirror need to re-arrange to match the factory harness. 10 minutes job. View attachment 672 View attachment 673 View attachment 674 View attachment 675
Onexcite
Thanks for the info. We have a white limited and I am bummed about some of the silly things they didn't do, like not backlighting the buttons on the mirror. Tell me, were you able to discern whether or not the buttons are capable of lighting on the original, but perhaps not wired? I have a 2015 Genesis and the mirror lights on that. A used one on Ebay is only 40 dollars. Maybe it can be switched out.
 

·
Registered
Joined
·
71 Posts
Discussion Starter #19
They must order the mirror without the lighting buttons, the same for door courtesy lights, overhead switch.... You can get a used mirror on ebay and swap out the whole unit but the wiring need to re-match.


Onexcite
Thanks for the info. We have a white limited and I am bummed about some of the silly things they didn't do, like not backlighting the buttons on the mirror. Tell me, were you able to discern whether or not the buttons are capable of lighting on the original, but perhaps not wired? I have a 2015 Genesis and the mirror lights on that. A used one on Ebay is only 40 dollars. Maybe it can be switched out.
 

·
Registered
Joined
·
4 Posts
I have to say that was one of the few things that I noticed that was deficient on the Palisade vs the rivals - the bulky mirror vs the frameless. That looks great, nice job!
If a Palisade is missing a $200 mirror in comparison to a "rival" that costs $5K+ more, then missing mirror is NOT a deficiency.
 
1 - 20 of 41 Posts
Top