Hyundai Palisade Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
7 Posts
Wonder is you can use a plastic putty knife or something similar with a thin piece of cloth wrapped on the end to slide it under the portion of the fin sticking up. It would allow you to gently "feel" if there is anything blocking it's return to flush mounting postion. Being wary of anything that feels as if it moves or flexes, that might indicate some seal or wire out of position.
As far as cleaning the scratches, I'd try some cleaner/wax paste or possibly a mild compound on the scratches.
 
1 - 1 of 1 Posts
Top