I want to place the license plate (bracket) on the front, middle of my 2025 Hyundai Palisade below the grill. Does anyone know if there's a sensor in that area. I've seen pictures of license plates there, but can't find any mounting instructions.
Tamara
As Mr. P said - do not block the radar - which is the red square in the picture below. In the photo is the stock location for the factory mounting bracket. Be sure not to use too large of a decorative/vanity frame - if you use one at all. The bottom of the plate is VERY close to the top edge of the sensor - and going with too large of a decorative frame may cause strange reflections for the radar.
Also - do not mount in front of the red circles - those are your parking sensors. The blue box is the knock-out for the tow-hook. Don't block that, either - and for god's sake please do not do what the ricers do and screw in a tow-hook plate bracket. LOL. That would truly look silly on a Pali.
![Image]()
Also - do not mount in front of the red circles - those are your parking sensors. The blue box is the knock-out for the tow-hook. Don't block that, either - and for god's sake please do not do what the ricers do and screw in a tow-hook plate bracket. LOL. That would truly look silly on a Pali.
I have a 2025 palisade. There is a s ensor (radar). The dealership gave me a special bracket to put the front license plate on the grill. There are several places to buy online for about $20. https://www.partsgeek.com/hbpkmwc-h...BhBTEiwAaJfPpnFjzX6-_iVHbfSOB4vLNic6F1vwZTX4JipBm3PIuvESXEDqwq7o_hoCrLQQAvD_BwE
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
